We know that not all buildings are ready for you to use the elevator, or at first you have no need for it, but as time goes on, you have changed your demand for housing upgrades.
Many buildings in Germany have elevators installed after the war. Schnelling has a lot of experience and is ready for your request.
Maximally meet the demands for extended running comfort and longer life.
CTP®, the world's leading technological innovations meet the highest demands of wire rope performance and have excellent efficiency
Reduce costs by up to 40%.
Small diameter wire rope and traction wheel would cut the investment and operation costs.
Reduce maintenance costs by up to 100%.
CTP® Wire Rope does not require maintenance and Lubrication at later stage
Runningl comfort is significantly improved.
The polymer coating eliminates or absorbs vibrations, which helps make the elevator run more smoothly .
The service life is greatly improved.
Since the wheel groove and elevator wirerope of traction machine are not easy to be worn, the frequency of wirerope replacement and the related cost will be greatly reduced.
With rolling contact to reduce friction resistance between guide boots and guideways, save power, reduce vibration and noise, and apply to high speed and mine elevators (above 2m/s). The initial pressure of the roller to the guide rail is adjusted by adjusting the amount of compression of the spring . The roller should be in even contact with the working surface of the guide rail over the entire rim width. When car is running, the three rollers keep rolling together so that it running smoothly .
Not allowed to add lubricating oil to the working surface of the rail to avoid slipping. The sliding guide shoe needs to be lubricated to reduce frictional resistance ,place the oil tank on the top of the two upper guide shoes ,and evenly apply to the lubricating oil onto the working surface of the guide shoes to get automatic lubrication